-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
There are no active projects for this committee
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
-
Association of Consultants in Access Australia
-
Australian Association of Occupational Therapists
-
Australian Blindness Forum
-
Australian Building Codes Board
-
Australian Industry Group
-
Australian Institute of Architects
-
Australian Institute of Building Surveyors
-
Australian Institute of Landscape Architects
-
Austroads Ltd.
-
BD-094 Liaison
-
Blind Citizens Australia
-
Consumers Federation of Australia
-
Deafness Forum of Australia
-
Department of Industry, Science, Energy and Resources
-
Engineers Australia
-
For Information
-
Housing Industry Association
-
Human Factors and Ergonomics Society of Australia Inc
-
Master Builders Australia
-
Mobility Research Centre New Zealand
-
National Association of Testing Authorities Australia
-
NSW Fair Trading
-
Physical Disability Australia
-
Property Council of Australia
-
Standards Australia
-
Standards New Zealand
-
The Blind Foundation
-
UITP Australia New Zealand
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
-
Accessibility and usability of the built environment
-
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
Design for access and mobility-General requirements for access - New building work
Sets out minimum design requirements for new building work, as required by the Building Code of Australia (BCA), to enable access for people with disabilities. It covers aspects of access to and within a building.
-
Design for access and mobility-General requirements for access - New building work
Sets out minimum design requirements for new building work, as required by the Building Code of Australia (BCA), to enable access for people with disabilities. It covers aspects of access to and within a building.
-
Design for access and mobility-General requirements for access - New building work
Sets out minimum design requirements for new building work, as required by the Building Code of Australia (BCA), to enable access for people with disabilities. It covers aspects of access to and within a building.
-
Design for access and mobility-General requirements for access - New building work
Sets out minimum design requirements for new building work, as required by the Building Code of Australia (BCA), to enable access for people with disabilities. It covers aspects of access to and within a building.
-
Design for access and mobility-General requirements for access - New building work
Sets out minimum design requirements for new building work, as required by the Building Code of Australia (BCA), to enable access for people with disabilities. It covers aspects of access to and within a building.
-
AS 1428.1-2009 Amd 2:2017
Design for access and mobility, Part 1: General requirements for access
-
AS 1428.1-2009 Amd 2:2017
Design for access and mobility, Part 1: General requirements for access
-
AS 1428.1-2009 Amd 2:2017
Design for access and mobility, Part 1: General requirements for access
-
AS 1428.1-2009 Amd 2:2017
Design for access and mobility, Part 1: General requirements for access
-
AS 1428.1-2009 Amd 2:2017
Design for access and mobility, Part 1: General requirements for access
-
AS 1428.1-2009 Amd 2:2017
Design for access and mobility, Part 1: General requirements for access
-
Design for access and mobility-General requirements for access - New building work
-
Design for access and mobility-General requirements for access - New building work
-
Design for access and mobility-General requirements for access - New building work
-
Design for access and mobility-General requirements for access - New building work
-
Design for access and mobility-General requirements for access - New building work
-
Design for access and mobility - Enhanced and additional requirements - Buildings and facilities
Sets out requirements for the design of buildings and facilities for access for people with disabilities. Where appropriate, these requirements are additional to the minimum requirements of AS 1428.1. Also covers requirements for buildings and facilities which are not covered in Part 1.
-
Design for access and mobility - Enhanced and additional requirements - Buildings and facilities
Sets out requirements for the design of buildings and facilities for access for people with disabilities. Where appropriate, these requirements are additional to the minimum requirements of AS 1428.1. Also covers requirements for buildings and facilities which are not covered in Part 1.
-
Design for access and mobility - Enhanced and additional requirements - Buildings and facilities
Sets out requirements for the design of buildings and facilities for access for people with disabilities. Where appropriate, these requirements are additional to the minimum requirements of AS 1428.1. Also covers requirements for buildings and facilities which are not covered in Part 1.
-
Design for access and mobility - Enhanced and additional requirements - Buildings and facilities
-
Design for access and mobility, Part 4.2: Means to assist the orientation of people with vision impairment - Wayfinding signs
The objective of this Standard is to assist in the provision of a built environment that is legible to all people with particular attention to people who are blind or have low vision, through the provision of tactile signs. Other forms of complementary wayfinding including new technologies are not addressed by this
-
Design for access and mobility, Part 4.2: Means to assist the orientation of people with vision impairment - Wayfinding signs
The objective of this Standard is to assist in the provision of a built environment that is legible to all people with particular attention to people who are blind or have low vision, through the provision of tactile signs. Other forms of complementary wayfinding including new technologies are not addressed by this
-
Design for access and mobility, Part 4.2: Means to assist the orientation of people with vision impairment - Wayfinding signs
The objective of this Standard is to assist in the provision of a built environment that is legible to all people with particular attention to people who are blind or have low vision, through the provision of tactile signs. Other forms of complementary wayfinding including new technologies are not addressed by this
-
Design for access and mobility, Part 4.2: Means to assist the orientation of people with vision impairment - Wayfinding signs
The objective of this Standard is to assist in the provision of a built environment that is legible to all people with particular attention to people who are blind or have low vision, through the provision of tactile signs. Other forms of complementary wayfinding including new technologies are not addressed by this
-
Design for access and mobility-Communication for people who are deaf or hearing impaired
Sets out requirements for the design, application and testing of assistive listening systems. It also provides information to enable access to communication for people who have a hearing impairment or who are deaf.
-
Design for access and mobility-Communication for people who are deaf or hearing impaired
Sets out requirements for the design, application and testing of assistive listening systems. It also provides information to enable access to communication for people who have a hearing impairment or who are deaf.
-
Design for access and mobility-Communication for people who are deaf or hearing impaired
Sets out requirements for the design, application and testing of assistive listening systems. It also provides information to enable access to communication for people who have a hearing impairment or who are deaf.
-
Design for access and mobility - Part 5: Communication for people who are deaf or hearing impaired
-
Design for access and mobility - Means to assist the orientation of people with vision impairment - Tactile ground surface indicators
Sets out requirements for the design and application of tactile ground surface indicators for new buildings to ensure safe and dignified mobility of people who are blind or vision impaired.
-
Design for access and mobility - Means to assist the orientation of people with vision impairment - Tactile ground surface indicators
Sets out requirements for the design and application of tactile ground surface indicators for new buildings to ensure safe and dignified mobility of people who are blind or vision impaired.
-
Design for access and mobility - Means to assist the orientation of people with vision impairment - Tactile ground surface indicators
Sets out requirements for the design and application of tactile ground surface indicators for new buildings to ensure safe and dignified mobility of people who are blind or vision impaired.
-
AS/NZS 1428.4.1:2009 AMDT 1
Design for access and mobility
-
AS/NZS 1428.4.1:2009 AMDT 1
Design for access and mobility
-
AS/NZS 1428.4.1:2009 AMDT 1
Design for access and mobility
-
AS/NZS 1428.4.1:2009 AMDT 2
Design for access and mobility - Means to assist the orientation of people with vision impairment - Tactile ground surface indicators
-
AS/NZS 1428.4.1:2009 AMDT 2
Design for access and mobility - Means to assist the orientation of people with vision impairment - Tactile ground surface indicators
-
AS/NZS 1428.4.1:2009 AMDT 2
Design for access and mobility - Means to assist the orientation of people with vision impairment - Tactile ground surface indicators
-
The Sub Committees within the Technical Committee are listed here.
-
ME-064-00-01 Access to Buildings - General requiremen
-
ME-064-00-02 Furniture, Fitments, Fittings and Equipm
-
ME-064-00-03 Children and Adolescents
-
ME-064-00-04 Vision
-
ME-064-00-05 Hearing Augmentation
-
ME-064-00-06 Purpose Built Buildings
-
ME-064-00-07 Outdoor Access
-
ME-064-00-08 Adaptable Housing
-
ME-064-00-09 Aged Care
-
ME-064-00-10 Handbook/Checklist
-
ME-064-01 Fixtures and Fittings for accessible housing
-
ME-064-02 Wayfinding
-
ME-064-03 Housing design for people with specific disabilities