-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
Project Code
Project Title
-
Glued laminated structural timber - Performance requirements
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
-
Australian Building Codes Board
-
Australian Forest Products Association
-
Australian Timber Importers Federation Inc
-
Australian Wood Panels Association
-
Building Research Association of New Zealand
-
Engineered Wood Products Association of Australasia
-
Forest and Wood Products Australia Ltd.
-
Furntech - Australasian Furnishing Research & Development Institute
-
Glued Laminated Timber Association of Australia
-
Independent Chairperson (Australia)
-
Master Builders Australia
-
New Zealand Plywood Manufacturers Association
-
New Zealand Timber Industry Federation
-
Standards New Zealand
-
Timber Design Society
-
Timber Queensland
-
University of Melbourne
-
Wood Processors & Manufacturers Association of New Zealand
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
Particleboard flooring - Installation
Proposes procedures for the selection, placement and fixing of Class 1 particleboard flooring complying with AS/NZS 1860.1. Appendices propose check lists for areas of supervision, recommendations for subfloor ventilation, and recommendations on installation procedures for particleboard flooring for general domestic applications.
-
Particleboard flooring - Installation
Proposes procedures for the selection, placement and fixing of Class 1 particleboard flooring complying with AS/NZS 1860.1. Appendices propose check lists for areas of supervision, recommendations for subfloor ventilation, and recommendations on installation procedures for particleboard flooring for general domestic applications.
-
Particleboard flooring - Installation
Proposes procedures for the selection, placement and fixing of Class 1 particleboard flooring complying with AS/NZS 1860.1. Appendices propose check lists for areas of supervision, recommendations for subfloor ventilation, and recommendations on installation procedures for particleboard flooring for general domestic applications.
-
Particleboard flooring - Installation
Proposes procedures for the selection, placement and fixing of Class 1 particleboard flooring complying with AS/NZS 1860.1. Appendices propose check lists for areas of supervision, recommendations for subfloor ventilation, and recommendations on installation procedures for particleboard flooring for general domestic applications.
-
Particleboard flooring-Installation
-
Particleboard flooring-Installation
-
Particleboard flooring-Installation
-
Particleboard flooring - Part 2: Installation
-
Particleboard flooring - Part 2: Installation
-
Particleboard flooring - Part 2: Installation
-
Timber - Finger joints in structural products - Production requirements
specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members. Requirements are also given for timber, adhesive, moisture content, cutting, bonding, preservative treatments and flame-retardant treatments.
-
Timber - Finger joints in structural products - Production requirements
specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members. Requirements are also given for timber, adhesive, moisture content, cutting, bonding, preservative treatments and flame-retardant treatments.
-
Timber - Finger joints in structural products - Production requirements
specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members. Requirements are also given for timber, adhesive, moisture content, cutting, bonding, preservative treatments and flame-retardant treatments.
-
Timber - Finger joints in structural products - Production requirements
-
Timber - Finger joints in structural products - Production requirements
-
Timber - Finger joints in structural products - Production requirements
-
Timber - Finger joints in non-structural products - Production requirements
Specifies minimum requirements for the manufacture of bonded finger joints in non-structural timber products. Requirements are given for timber, adhesive, cutting, bonding, preservative treatments and flame-retardant treatments.
-
Timber - Finger joints in non-structural products - Production requirements
Specifies minimum requirements for the manufacture of bonded finger joints in non-structural timber products. Requirements are given for timber, adhesive, cutting, bonding, preservative treatments and flame-retardant treatments.
-
Timber - Finger joints in non-structural products - Production requirements
Specifies minimum requirements for the manufacture of bonded finger joints in non-structural timber products. Requirements are given for timber, adhesive, cutting, bonding, preservative treatments and flame-retardant treatments.
-
Timber - Finger joints in non-structural products - Production requirements
-
Timber - Finger joints in non-structural products - Production requirements
-
Specifies requirements for the manufacture, grading, finishing and branding of plywood used specifically in formwork, with a maximum length of 3100mm and width of 1500mm, intended to meet off-form surface finish requirements of Classes2, 3, 4 and 5 as specified in AS3610.1.
-
Specifies requirements for the manufacture, grading, finishing and branding of plywood used specifically in formwork, with a maximum length of 3100mm and width of 1500mm, intended to meet off-form surface finish requirements of Classes2, 3, 4 and 5 as specified in AS3610.1.
-
Specifies requirements for the manufacture, grading, finishing and branding of plywood used specifically in formwork, with a maximum length of 3100mm and width of 1500mm, intended to meet off-form surface finish requirements of Classes2, 3, 4 and 5 as specified in AS3610.1.
-
Specifies requirements for the manufacture, grading, finishing and branding of plywood used specifically in formwork, with a maximum length of 3100mm and width of 1500mm, intended to meet off-form surface finish requirements of Classes2, 3, 4 and 5 as specified in AS3610.1.
-
Specifies requirements for the manufacture, grading, finishing and branding of plywood used specifically in formwork, with a maximum length of 3100mm and width of 1500mm, intended to meet off-form surface finish requirements of Classes2, 3, 4 and 5 as specified in AS3610.1.
-
Provides minimum performance requirements and specifications for the manufacture and application of plywood for use in the specific application of concrete formwork in Australia.
-
Glued laminated structural timber - Performance requirements and minimum production requirements
Specifies product requirements for the timber used, the type of adhesive and the strength of the load in both end and lamination joints. It also gives methods for establishing properties of completed structural pieces so that product may be assigned to a stress grade. Methods of test are given to measure the strength of a glued joint.
-
Glued laminated structural timber - Performance requirements and minimum production requirements
Specifies product requirements for the timber used, the type of adhesive and the strength of the load in both end and lamination joints. It also gives methods for establishing properties of completed structural pieces so that product may be assigned to a stress grade. Methods of test are given to measure the strength of a glued joint.
-
Glued laminated structural timber - Performance requirements and minimum production requirements
Specifies product requirements for the timber used, the type of adhesive and the strength of the load in both end and lamination joints. It also gives methods for establishing properties of completed structural pieces so that product may be assigned to a stress grade. Methods of test are given to measure the strength of a glued joint.
-
AS/NZS 1328.1:1998/Amdt 1:2011
Glued laminated structural timber - Part 1: Performance requirements and minimum production requirements
-
AS/NZS 1328.1:1998/Amdt 1:2011
Glued laminated structural timber - Part 1: Performance requirements and minimum production requirements
-
AS/NZS 1328.1:1998/Amdt 1:2011
Glued laminated structural timber - Part 1: Performance requirements and minimum production requirements
-
Glued laminated structural timber - Guidelines for AS/NZS 1328: Part 1 for the selection, production and installation of glued laminated structural timber
Intended for use in conjunction with AS/NZS 1328.1 This Standard provides detailed guidance for production of glulam. A set of stress grades is given for design purposes to simplify the use and installation of graded material. Guidelines are also provided for quality control, third party certification and for establishing structural properties.
-
Reconstituted wood-based panels - Specifications, Part 1: Particleboard, Part 1:
This Standard specifies performance requirements for the manufacture and application of particleboard.
-
Reconstituted wood-based panels - Specifications, Part 1: Particleboard, Part 1:
This Standard specifies performance requirements for the manufacture and application of particleboard.
-
Reconstituted wood-based panels - Specifications, Part 1: Particleboard, Part 1:
This Standard specifies performance requirements for the manufacture and application of particleboard.
-
Reconstituted wood-based panels - Specifications, Part 1: Particleboard, Part 1:
This Standard specifies performance requirements for the manufacture and application of particleboard.
-
Reconstituted wood-based panels - Specifications, Part 1: Particleboard, Part 1:
This Standard specifies performance requirements for the manufacture and application of particleboard.
-
Reconstituted wood-based panels - Specifications, Part 1: Particleboard, Part 1:
This Standard specifies performance requirements for the manufacture and application of particleboard.
-
Reconstituted wood-based panels - Specifications, Part 2: Part 2: Dry process fibreboard
Specifies the product requirements for three types of dry process fibreboards—ultra-low density, low density, medium density—for use under two service conditions—dry (STD) and moisture resistant (MR)—and as described in Clause 5.
-
Reconstituted wood-based panels - Specifications, Part 2: Part 2: Dry process fibreboard
Specifies the product requirements for three types of dry process fibreboards—ultra-low density, low density, medium density—for use under two service conditions—dry (STD) and moisture resistant (MR)—and as described in Clause 5.
-
Reconstituted wood-based panels - Specifications, Part 2: Part 2: Dry process fibreboard
Specifies the product requirements for three types of dry process fibreboards—ultra-low density, low density, medium density—for use under two service conditions—dry (STD) and moisture resistant (MR)—and as described in Clause 5.
-
Reconstituted wood-based panels - Specifications, Part 2: Part 2: Dry process fibreboard
Specifies the product requirements for three types of dry process fibreboards—ultra-low density, low density, medium density—for use under two service conditions—dry (STD) and moisture resistant (MR)—and as described in Clause 5.
-
Reconstituted wood-based panels - Specifications, Part 2: Part 2: Dry process fibreboard
Specifies the product requirements for three types of dry process fibreboards—ultra-low density, low density, medium density—for use under two service conditions—dry (STD) and moisture resistant (MR)—and as described in Clause 5.
-
Reconstituted wood-based panels - Specifications, Part 2: Part 2: Dry process fibreboard
Specifies the product requirements for three types of dry process fibreboards—ultra-low density, low density, medium density—for use under two service conditions—dry (STD) and moisture resistant (MR)—and as described in Clause 5.
-
Reconstituted wood-based panels - Specifications, Part 3: Decorative overlaid wood panels
Provides performance requirements and specifications for the manufacture and application of decorative overlaid wood panels. Specifies dimensional tolerances and physical and mechanical properties for four types of decorative overlay applied to wood panel substrate, that is, low pressure melamine (LPM), PVC film, paper foils, and wood veneers. Appendices provide information on handling and storage of decorative wood panels and selection and application of screw fasteners.
-
Reconstituted wood-based panels - Specifications, Part 3: Decorative overlaid wood panels
Provides performance requirements and specifications for the manufacture and application of decorative overlaid wood panels. Specifies dimensional tolerances and physical and mechanical properties for four types of decorative overlay applied to wood panel substrate, that is, low pressure melamine (LPM), PVC film, paper foils, and wood veneers. Appendices provide information on handling and storage of decorative wood panels and selection and application of screw fasteners.
-
Reconstituted wood-based panels - Specifications, Part 3: Decorative overlaid wood panels
Provides performance requirements and specifications for the manufacture and application of decorative overlaid wood panels. Specifies dimensional tolerances and physical and mechanical properties for four types of decorative overlay applied to wood panel substrate, that is, low pressure melamine (LPM), PVC film, paper foils, and wood veneers. Appendices provide information on handling and storage of decorative wood panels and selection and application of screw fasteners.
-
Reconstituted wood-based panels - Specifications, Part 3: Decorative overlaid wood panels
Provides performance requirements and specifications for the manufacture and application of decorative overlaid wood panels. Specifies dimensional tolerances and physical and mechanical properties for four types of decorative overlay applied to wood panel substrate, that is, low pressure melamine (LPM), PVC film, paper foils, and wood veneers. Appendices provide information on handling and storage of decorative wood panels and selection and application of screw fasteners.
-
Reconstituted wood-based panels - Specifications, Part 4: Wet process fibreboard
Specifies product requirements for wet process fibreboard, including hardboard, medium board and softboard.
-
Reconstituted wood-based panels - Specifications, Part 4: Wet process fibreboard
Specifies product requirements for wet process fibreboard, including hardboard, medium board and softboard.
-
Reconstituted wood-based panels - Specifications, Part 4: Wet process fibreboard
Specifies product requirements for wet process fibreboard, including hardboard, medium board and softboard.
-
Reconstituted wood-based panels - Specifications, Part 4: Wet process fibreboard
Specifies product requirements for wet process fibreboard, including hardboard, medium board and softboard.
-
Reconstituted wood-based panels - Specifications, Part 4: Wet process fibreboard
Specifies product requirements for wet process fibreboard, including hardboard, medium board and softboard.
-
Reconstituted wood-based panels - Specifications, Part 4: Wet process fibreboard
Specifies product requirements for wet process fibreboard, including hardboard, medium board and softboard.
-
Reconstituted wood-based panels - Specifications, Part 4: Wet process fibreboard
Specifies product requirements for wet process fibreboard, including hardboard, medium board and softboard.
-
Particleboard Flooring, Part 1: Specifications
Specifies performance requirements in the manufacture and application of particleboard flooring.
-
Particleboard Flooring, Part 1: Specifications
Specifies performance requirements in the manufacture and application of particleboard flooring.
-
Particleboard Flooring, Part 1: Specifications
Specifies performance requirements in the manufacture and application of particleboard flooring.
-
Particleboard Flooring, Part 1: Specifications
Specifies performance requirements in the manufacture and application of particleboard flooring.
-
AS/NZS 2097:2006 Rec:2016
Methods for sampling veneer and plywood
-
Methods for sampling veneer and plywood
Provides procedures for sampling veneer and plywood for determination of physical and mechanical properties of mill runs, specially produced veneers and plywoods, and consignments.
-
Methods for sampling veneer and plywood
Provides procedures for sampling veneer and plywood for determination of physical and mechanical properties of mill runs, specially produced veneers and plywoods, and consignments.
-
Methods for sampling veneer and plywood
Provides procedures for sampling veneer and plywood for determination of physical and mechanical properties of mill runs, specially produced veneers and plywoods, and consignments.
-
AS/NZS 2098.0:2006 Rec:2016
Methods of test for veneer and plywood - Part 0: General introduction and list of methods
-
Methods of test for veneer and plywood - General introduction and list of methods
-
Methods of test for veneer and plywood - General introduction and list of methods
-
Methods of test for veneer and plywood - General introduction and list of methods
-
AS/NZS 2098.1:2006 Rec:2016
Methods of test for veneer and plywood - Method 1: Moisture content of veneer and plywood
-
AS/NZS 2098.11:2005 Rec:2016
Methods of test for veneer and plywood - Method 11: Determination of formaldehyde emissions for plywood
-
AS/NZS 2098.11:2005 Rec:2016
Methods of test for veneer and plywood - Method 11: Determination of formaldehyde emissions for plywood
-
AS/NZS 2098.11:2005 Rec:2016
Methods of test for veneer and plywood - Method 11: Determination of formaldehyde emissions for plywood
-
Methods of test for veneer and plywood - Determination of formaldehyde emissions for plywood
-
Methods of test for veneer and plywood - Determination of formaldehyde emissions for plywood
-
Methods of test for veneer and plywood - Determination of formaldehyde emissions for plywood
-
Methods of test for veneer and plywood - Moisture content of veneer and plywood
-
Methods of test for veneer and plywood - Moisture content of veneer and plywood
-
Methods of test for veneer and plywood - Moisture content of veneer and plywood
-
Methods of test for veneer and plywood - Bond quality of plywood (chisel test)
-
Methods of test for veneer and plywood - Bond quality of plywood (chisel test)
-
Methods of test for veneer and plywood - Bond quality of plywood (chisel test)
-
AS/NZS 2098.3:2006 Rec:2016
Methods of test for veneer and plywood - Method 3: Bond quality and strength of scarf joints in plywood
-
Methods of test for veneer and plywood - Bond quality and strength of scarf joints in plywood
-
Methods of test for veneer and plywood - Bond quality and strength of scarf joints in plywood
-
Methods of test for veneer and plywood - Bond quality and strength of scarf joints in plywood
-
AS/NZS 2098.4:2006 Rec:2016
Methods of test for veneer and plywood - Method 4: Measurement of dimensions and shape for sheets of veneer and plywood
-
Methods of test for veneer and plywood - Measurement of dimensions and shape for sheets of veneer and plywood
-
Methods of test for veneer and plywood - Measurement of dimensions and shape for sheets of veneer and plywood
-
Methods of test for veneer and plywood - Measurement of dimensions and shape for sheets of veneer and plywood
-
AS/NZS 2098.5:2006 Rec:2016
Methods of test for veneer and plywood - Method 5: Resistance of gluelines in plywood to attack by micro-organisms
-
Methods of test for veneer and plywood - Resistance of gluelines in plywood to attack by micro-organisms
-
Methods of test for veneer and plywood - Resistance of gluelines in plywood to attack by micro-organisms
-
Methods of test for veneer and plywood - Resistance of gluelines in plywood to attack by micro-organisms
-
AS/NZS 2098.6:2006 Rec:2016
Methods of test for veneer and plywood - Method 6: Depth of peeler checks in veneer and plywood
-
Methods of test for veneer and plywood - Depth of peeler checks in veneer and plywood
-
Methods of test for veneer and plywood - Depth of peeler checks in veneer and plywood
-
Methods of test for veneer and plywood - Depth of peeler checks in veneer and plywood
-
AS/NZS 2098.7:2006 Rec:2016
Methods of test for veneer and plywood - Method 7: Density of veneer and plywood
-
Methods of test for veneer and plywood - Density of veneer and plywood
-
Methods of test for veneer and plywood - Density of veneer and plywood
-
Methods of test for veneer and plywood - Density of veneer and plywood
-
AS/NZS 2098.8:2006 Rec:2016
Methods of test for veneer and plywood - Method 8: Water absorption and thickness swelling of unpainted plywood
-
Methods of test for veneer and plywood - Water absorption and thickness swelling of unpainted plywood
-
Methods of test for veneer and plywood - Water absorption and thickness swelling of unpainted plywood
-
Methods of test for veneer and plywood - Water absorption and thickness swelling of unpainted plywood
-
Plywood - Structural - Specifications
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
-
Plywood - Structural - Specifications
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
-
Plywood - Structural - Specifications
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
-
Plywood - Structural - Specifications
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
-
Plywood - Structural - Specifications
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
-
Plywood - Structural - Specifications
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
-
Plywood - Structural - Specifications
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
-
Plywood - Structural - Specifications
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
-
AS/NZS 2269.0-2012 Amd 1:2015
Plywood - Structural - Specifications
-
AS/NZS 2269.0-2012 Amd 1:2015
Plywood - Structural - Specifications
-
AS/NZS 2269.0-2012 Amd 1:2015
Plywood - Structural - Specifications
-
Plywood - Structural - Determination of structural properties - Test methods
Specifies test methods to determine the structural properties of structural plywood.
-
Plywood - Structural - Determination of structural properties - Test methods
Specifies test methods to determine the structural properties of structural plywood.
-
Plywood - Structural - Determination of structural properties - Test methods
Specifies test methods to determine the structural properties of structural plywood.
-
Plywood - Structural - Determination of structural properties - Evaluation methods
-
Plywood - Structural - Determination of structural properties - Evaluation methods
-
Plywood - Structural - Determination of structural properties - Evaluation methods
-
-
-
-
AS/NZS 2270:2006 Rec:2016
Plywood and blockboard for interior use
-
Plywood and blockboard for interior use
Provides minimum performance requirements and specifications for appearance and non-appearance grades of plywood and blockboard acceptable for use in fully protected interior applications in Australia and New Zealand. Describes the basic interior plywood and blockboard product. Particular end uses may require additional processing, immunization or surface finishing.
-
Plywood and blockboard for interior use
Provides minimum performance requirements and specifications for appearance and non-appearance grades of plywood and blockboard acceptable for use in fully protected interior applications in Australia and New Zealand. Describes the basic interior plywood and blockboard product. Particular end uses may require additional processing, immunization or surface finishing.
-
Plywood and blockboard for interior use
Provides minimum performance requirements and specifications for appearance and non-appearance grades of plywood and blockboard acceptable for use in fully protected interior applications in Australia and New Zealand. Describes the basic interior plywood and blockboard product. Particular end uses may require additional processing, immunization or surface finishing.
-
Plywood and blockboard for interior use
-
Plywood and blockboard for interior use
-
Plywood and blockboard for interior use
-
AS/NZS 2271:2004 Rec:2016
Plywood and blockboard for exterior use
-
Plywood and blockboard for exterior use
Specifies the requirements for the manufacture, grading, finishing and branding of an appearance grade of non-structural plywood and non-structural blockboard bonded with adhesives of suitable durability for use in applications where the product is exposed to the weather or wet or damp conditions.
-
Plywood and blockboard for exterior use
Specifies the requirements for the manufacture, grading, finishing and branding of an appearance grade of non-structural plywood and non-structural blockboard bonded with adhesives of suitable durability for use in applications where the product is exposed to the weather or wet or damp conditions.
-
Plywood and blockboard for exterior use
Specifies the requirements for the manufacture, grading, finishing and branding of an appearance grade of non-structural plywood and non-structural blockboard bonded with adhesives of suitable durability for use in applications where the product is exposed to the weather or wet or damp conditions.
-
Plywood and blockboard for exterior use
-
Plywood and blockboard for exterior use
-
Plywood and blockboard for exterior use
-
AS/NZS 2272:2006 Rec:2016
-
Specifies requirements for the manufacture, grading and finishing of plywood intended for marine use.
-
Specifies requirements for the manufacture, grading and finishing of plywood intended for marine use.
-
Specifies requirements for the manufacture, grading and finishing of plywood intended for marine use.
-
Adhesives for timber and timber products - Adhesives for manufacture of plywood and laminated veneer lumber (LVL)
AS K88 first published 1952. AS K89 first published 1953. AS 2754.1 first published 1985. Jointly revised and redesignated as AS/NZS 2754.1(Int)-2008. This edition 2016.
-
Adhesives for timber and timber products - Adhesives for manufacture of plywood and laminated veneer lumber (LVL)
AS K88 first published 1952. AS K89 first published 1953. AS 2754.1 first published 1985. Jointly revised and redesignated as AS/NZS 2754.1(Int)-2008. This edition 2016.
-
Adhesives for timber and timber products - Adhesives for manufacture of plywood and laminated veneer lumber (LVL)
AS K88 first published 1952. AS K89 first published 1953. AS 2754.1 first published 1985. Jointly revised and redesignated as AS/NZS 2754.1(Int)-2008. This edition 2016.
-
Reconstituted wood-based panels - Methods of testing, Part 1: Base panels
Covers methods of test for properties specified in the following Standards for reconstituted wood-based panels: AS/NZS 1859.1, AS/NZS 1859.2, AS/NZS 1859.4 and AS/NZS 1860.1.
-
Reconstituted wood-based panels - Methods of testing, Part 1: Base panels
Covers methods of test for properties specified in the following Standards for reconstituted wood-based panels: AS/NZS 1859.1, AS/NZS 1859.2, AS/NZS 1859.4 and AS/NZS 1860.1.
-
Reconstituted wood-based panels - Methods of testing, Part 1: Base panels
Covers methods of test for properties specified in the following Standards for reconstituted wood-based panels: AS/NZS 1859.1, AS/NZS 1859.2, AS/NZS 1859.4 and AS/NZS 1860.1.
-
Reconstituted wood-based panels - Methods of testing, Part 1: Base panels
Covers methods of test for properties specified in the following Standards for reconstituted wood-based panels: AS/NZS 1859.1, AS/NZS 1859.2, AS/NZS 1859.4 and AS/NZS 1860.1.
-
Reconstituted wood-based panels - Methods of testing, Part 1: Base panels
Covers methods of test for properties specified in the following Standards for reconstituted wood-based panels: AS/NZS 1859.1, AS/NZS 1859.2, AS/NZS 1859.4 and AS/NZS 1860.1.
-
Reconstituted wood-based panels - Methods of testing, Part 2: Decorative overlaid panels
Covers methods of test for properties relating to decorative overlaid reconstituted wood panels. Decorative overlays are low pressure melamine, PVC film, decorative foils and wood veneer.
-
Reconstituted wood-based panels - Methods of testing, Part 2: Decorative overlaid panels
Covers methods of test for properties relating to decorative overlaid reconstituted wood panels. Decorative overlays are low pressure melamine, PVC film, decorative foils and wood veneer.
-
Reconstituted wood-based panels - Methods of testing, Part 2: Decorative overlaid panels
Covers methods of test for properties relating to decorative overlaid reconstituted wood panels. Decorative overlays are low pressure melamine, PVC film, decorative foils and wood veneer.
-
AS/NZS 4357.0:2005 Rec:2016
Structural laminated veneer lumber - Part 0: Specifications
-
Structural laminated veneer lumber - Specifications
Specifies requirements for the manufacture, structural characterization, and structural verification of laminated veneer lumber intended for structural applications, and sets out dimensional tolerances, moisture content, veneer and bond quality, and structural properties to be determined for structural LVL. Also specifies requirements for formaldehyde emission.
-
Structural laminated veneer lumber - Specifications
Specifies requirements for the manufacture, structural characterization, and structural verification of laminated veneer lumber intended for structural applications, and sets out dimensional tolerances, moisture content, veneer and bond quality, and structural properties to be determined for structural LVL. Also specifies requirements for formaldehyde emission.
-
Structural laminated veneer lumber - Specifications
Specifies requirements for the manufacture, structural characterization, and structural verification of laminated veneer lumber intended for structural applications, and sets out dimensional tolerances, moisture content, veneer and bond quality, and structural properties to be determined for structural LVL. Also specifies requirements for formaldehyde emission.
-
AS/NZS 4357.1:2005 Rec:2016
Structural laminated veneer lumber - Part 1: Method of test for measurement of dimensions and shape
-
Structural laminated veneer lumber - Method of test for measurement of dimensions and shape
Specifies methods for the measurement of dimensions and shape for structural LVL.
-
Structural laminated veneer lumber - Method of test for measurement of dimensions and shape
Specifies methods for the measurement of dimensions and shape for structural LVL.
-
Structural laminated veneer lumber - Method of test for measurement of dimensions and shape
Specifies methods for the measurement of dimensions and shape for structural LVL.
-
AS/NZS 4357.2:2006 Rec:2016
Structural laminated veneer lumber (LVL) - Part 2: Determination of structural properties - Test methods
-
Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods
Specifies test methods for the determination of structural properties of structural laminated veneer lumber (LVL).
-
Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods
Specifies test methods for the determination of structural properties of structural laminated veneer lumber (LVL).
-
Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods
Specifies test methods for the determination of structural properties of structural laminated veneer lumber (LVL).
-
AS/NZS 4357.2-2006 AMDT 1
Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods
-
AS/NZS 4357.2-2006 AMDT 1
Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods
-
AS/NZS 4357.2-2006 AMDT 1
Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods
-
AS/NZS 4357.3-2006 AMDT 1
Structural laminated veneer lumber (LVL) - Determination of structural properties - Evaluation methods
-
AS/NZS 4357.3-2006 AMDT 1
Structural laminated veneer lumber (LVL) - Determination of structural properties - Evaluation methods
-
AS/NZS 4357.3-2006 AMDT 1
Structural laminated veneer lumber (LVL) - Determination of structural properties - Evaluation methods
-
AS/NZS 4357.4:2005 Rec:2016
Structural laminated veneer lumber - Part 4: Determination of formaldehyde emissions
-
Structural laminated veneer lumber - Determination of formaldehyde emissions
Specifies test method for determination of formaldehyde emissions.
-
Structural laminated veneer lumber - Determination of formaldehyde emissions
Specifies test method for determination of formaldehyde emissions.
-
Structural laminated veneer lumber - Determination of formaldehyde emissions
Specifies test method for determination of formaldehyde emissions.
-
Timber - Bond performance of structural adhesives
Specifies performance requirements for adhesives, according to their suitability for use in prefabricated timber components for structural use in defined environmental conditions and for such adhesives for the manufacture of structural finger-jointed timber and glulam.
-
Timber - Bond performance of structural adhesives
Specifies performance requirements for adhesives, according to their suitability for use in prefabricated timber components for structural use in defined environmental conditions and for such adhesives for the manufacture of structural finger-jointed timber and glulam.
-
Timber - Bond performance of structural adhesives
Specifies performance requirements for adhesives, according to their suitability for use in prefabricated timber components for structural use in defined environmental conditions and for such adhesives for the manufacture of structural finger-jointed timber and glulam.
-
Timber - Finger-jointed structural timber - Product and performance requirements
Specifies product and performance requirements for finger-jointed structural timber made from solid timber, LVL, or glulam.
-
Timber - Finger-jointed structural timber - Product and performance requirements
Specifies product and performance requirements for finger-jointed structural timber made from solid timber, LVL, or glulam.
-
Timber - Finger-jointed structural timber - Product and performance requirements
Specifies product and performance requirements for finger-jointed structural timber made from solid timber, LVL, or glulam.
-
Timber - Finger-jointed structural timber - Product and performance requirements
Specifies product and performance requirements for finger-jointed structural timber made from solid timber, LVL, or glulam.
-
The Sub Committees within the Technical Committee are listed here.
-
TM-011-00 Dummy
-
TM-011-01 Glued laminated structural timber – performance requirements
-
TM-011-03 Finger jointed structural timber