-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
Project Code
Project Title
-
Specification for preservative treatment - Sawn and round timber
-
Preservative-treated wood-based products, Part 1:Products and treatment
-
Preservative-treated wood-based products, Part 2: Verification requirements
-
Specification for preservative treatment - Reconstituted wood-based products
-
Preservative-treated wood-based products, Part 3: Test methods
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
-
Australian and New Zealand Timber Preservative Manufacturers Association
-
Australian Forest Products Association
-
Australian Pesticide and Veterinary Medicines Authority
-
Australian Timber Flooring Association
-
Australian Timber Importers Federation Inc
-
Building Research Association of New Zealand
-
Construction Information Systems Limited (NATSPEC)
-
Department of Agriculture, Fisheries and Forestry (QLD)
-
Engineered Wood Products Association of Australasia
-
Forest and Wood Products Australia Ltd.
-
Forestry Corporation of NSW
-
Glued Laminated Timber Association of Australia
-
Independent Chairperson (Australia)
-
Master Builders Australia
-
Ministry of Business, Innovation and Employment (NZ)
-
National Centre for Timber Durability and Design Life
-
New Zealand Timber Industry Federation
-
New Zealand Timber Preservation Council
-
New Zealand Wood Processors Association
-
Responsible Care New Zealand
-
Scion
-
Standards New Zealand
-
Tasmanian Timber Promotion Board
-
Timber Preservers Association of Australia
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
-
Wood materials-durability and preservation - STAND BY
-
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
AS 1604.1:2012 Amd 1:2017
Specification for preservative treatment - Sawn and round timber
-
AS 1604.1:2012 Amd 1:2017
Specification for preservative treatment - Sawn and round timber
-
AS 1604.1:2012 Amd 1:2017
Specification for preservative treatment - Sawn and round timber
-
AS 1604.1:2012 Amd 1:2017
Specification for preservative treatment - Sawn and round timber
-
AS 1604.1:2012 Amd 1:2017
Specification for preservative treatment - Sawn and round timber
-
Specification for preservative treatment - Sawn and round timber
Sets out requirements for preservative-treated sawn and round timber for protection against decay, insect or marine borer attack.
-
Specification for preservative treatment - Sawn and round timber
Sets out requirements for preservative-treated sawn and round timber for protection against decay, insect or marine borer attack.
-
Specification for preservative treatment - Sawn and round timber
Sets out requirements for preservative-treated sawn and round timber for protection against decay, insect or marine borer attack.
-
Specification for preservative treatment - Sawn and round timber
Sets out requirements for preservative-treated sawn and round timber for protection against decay, insect or marine borer attack.
-
Specification for preservative treatment - Sawn and round timber
Sets out requirements for preservative-treated sawn and round timber for protection against decay, insect or marine borer attack.
-
Specification for preservative treatment - Sawn and round timber
Sets out requirements for preservative-treated sawn and round timber for protection against decay, insect or marine borer attack.
-
Specification for preservative treatment - Sawn and round timber
Sets out requirements for preservative-treated sawn and round timber for protection against decay, insect or marine borer attack.
-
Timber - Handles for tools
Specifies quality requirements for Grades AW and BW of hickory handles for striking tools and Grades A and B of Australian hardwood handles for both striking and non-striking tools. Appendices give recommendations for timber species, dimensions and tolerances of these tool handles.
-
Timber - Handles for tools
Specifies quality requirements for Grades AW and BW of hickory handles for striking tools and Grades A and B of Australian hardwood handles for both striking and non-striking tools. Appendices give recommendations for timber species, dimensions and tolerances of these tool handles.
-
Timber - Handles for tools
Specifies quality requirements for Grades AW and BW of hickory handles for striking tools and Grades A and B of Australian hardwood handles for both striking and non-striking tools. Appendices give recommendations for timber species, dimensions and tolerances of these tool handles.
-
Timber - Handles for tools
-
Timber - Seasoned cypress pine - Milled products
Specifies tolerance, machining grade limits and grade descriptions for tongue and groove flooring, light decking, lining, dressed boards, joinery stock and moulding, cladding, fascia boards, and barge boards milled from cypress pine and supplied seasoned. Appendices give information on requirements for finger-joining and recommendation for the installation of finishings and maintenance of cypress decking.
-
Timber - Seasoned cypress pine - Milled products
Specifies tolerance, machining grade limits and grade descriptions for tongue and groove flooring, light decking, lining, dressed boards, joinery stock and moulding, cladding, fascia boards, and barge boards milled from cypress pine and supplied seasoned. Appendices give information on requirements for finger-joining and recommendation for the installation of finishings and maintenance of cypress decking.
-
Timber - Seasoned cypress pine - Milled products
Specifies tolerance, machining grade limits and grade descriptions for tongue and groove flooring, light decking, lining, dressed boards, joinery stock and moulding, cladding, fascia boards, and barge boards milled from cypress pine and supplied seasoned. Appendices give information on requirements for finger-joining and recommendation for the installation of finishings and maintenance of cypress decking.
-
Timber - Seasoned cypress pine - Milled products
-
Timber - Hardwood - Visually stress-graded for structural purposes
Specifies requirements for visually stress-graded sawn hardwood intended for structural purposes, at the time of grading.
-
Timber - Hardwood - Visually stress-graded for structural purposes
Specifies requirements for visually stress-graded sawn hardwood intended for structural purposes, at the time of grading.
-
Timber - Hardwood - Visually stress-graded for structural purposes
Specifies requirements for visually stress-graded sawn hardwood intended for structural purposes, at the time of grading.
-
Timber-Hardwood-Visually stress-graded for structural purposes
RECONFIRMATION OF AS 2082-2007 Timber-Hardwood-Visually stress-graded for structural purposes
-
Timber - Hardwood - Sawn and milled products - Product specification
Specifies product requirements for sawn and milled hardwood products. Moisture content, profiles, tolerances and grades are covered. Requirements are also given for glued laminating, finger jointing and end-matching. Guidance is given on information to be supplied when ordering.
-
Timber - Hardwood - Sawn and milled products - Product specification
Specifies product requirements for sawn and milled hardwood products. Moisture content, profiles, tolerances and grades are covered. Requirements are also given for glued laminating, finger jointing and end-matching. Guidance is given on information to be supplied when ordering.
-
Timber - Hardwood - Sawn and milled products - Product specification
Specifies product requirements for sawn and milled hardwood products. Moisture content, profiles, tolerances and grades are covered. Requirements are also given for glued laminating, finger jointing and end-matching. Guidance is given on information to be supplied when ordering.
-
Timber - Hardwood - Sawn and milled products - Part 1: Product specification
-
Timber - Hardwood - Sawn and milled products - Grade description
Specifies grade descriptions for use with the hardwood milled products specified in AS 2796.1. These are primarily appearance products.
-
Timber - Hardwood - Sawn and milled products - Grade description
Specifies grade descriptions for use with the hardwood milled products specified in AS 2796.1. These are primarily appearance products.
-
Timber - Hardwood - Sawn and milled products - Grade description
Specifies grade descriptions for use with the hardwood milled products specified in AS 2796.1. These are primarily appearance products.
-
Timber - Hardwood - Sawn and milled products - Part 2: Grade description
-
Timber - Hardwood - Sawn and milled products - Timber for furniture components
Specifies product requirements and grade descriptions for sawn and milled hardwood for use in the production of furniture. Moisture content, tolerances, glue laminating and finger jointing are covered. The grades are not intended to indicate a ranking of quality. They are primarily used with appearance products.
-
Timber - Hardwood - Sawn and milled products - Timber for furniture components
Specifies product requirements and grade descriptions for sawn and milled hardwood for use in the production of furniture. Moisture content, tolerances, glue laminating and finger jointing are covered. The grades are not intended to indicate a ranking of quality. They are primarily used with appearance products.
-
Timber - Hardwood - Sawn and milled products - Timber for furniture components
Specifies product requirements and grade descriptions for sawn and milled hardwood for use in the production of furniture. Moisture content, tolerances, glue laminating and finger jointing are covered. The grades are not intended to indicate a ranking of quality. They are primarily used with appearance products.
-
Timber - Hardwood - Sawn and milled products - Part 3: Timber for furniture components
-
Timber - Softwood - Visually stress-graded for structural purposes
-
Timber - Machine proof grading
Specifies the requirements and procedures necessary for machine proof grading of timber. Methods and tables allowing estimates of the required proof-stress are included.
-
Timber - Machine proof grading
Specifies the requirements and procedures necessary for machine proof grading of timber. Methods and tables allowing estimates of the required proof-stress are included.
-
Timber - Machine proof grading
Specifies the requirements and procedures necessary for machine proof grading of timber. Methods and tables allowing estimates of the required proof-stress are included.
-
Timber - Machine proof grading
-
Timber - Heavy structural products - Visually graded-Building poles
Provides producers and users of building poles with requirements for the visual grading of such timbers intended for use in structures.
-
Timber - Heavy structural products - Visually graded-Building poles
Provides producers and users of building poles with requirements for the visual grading of such timbers intended for use in structures.
-
Timber - Heavy structural products - Visually graded-Building poles
Provides producers and users of building poles with requirements for the visual grading of such timbers intended for use in structures.
-
Timber - Heavy structural products - Visually graded-Utility poles
Provides producers and users of timber poles, with or without full-length preservative treatment, intended primarily for use in overhead lines for electrical distribution and telecommunications purposes, with requirements for the visual grading.
-
Timber - Heavy structural products - Visually graded-Utility poles
Provides producers and users of timber poles, with or without full-length preservative treatment, intended primarily for use in overhead lines for electrical distribution and telecommunications purposes, with requirements for the visual grading.
-
Timber - Heavy structural products - Visually graded, Part 11: Utility poles
Provides producers and users of timber poles, with or without full-length preservative treatment, intended primarily for use in overhead lines for electrical distribution and telecommunications purposes, with requirements for the visual grading.
-
Timber - Heavy structural products - Visually graded - General requirements
Provides producers and users of visually graded timber products with general requirements for the specific products covered by the other parts of this series.
-
Timber - Heavy structural products - Visually graded - Railway track timbers
Provides producers and users of railway track timbers with requirements for the visual grading and selection of species for such timbers intended for use in railway track.
-
Timber - Heavy structural products - Visually graded - Railway track timbers
Provides producers and users of railway track timbers with requirements for the visual grading and selection of species for such timbers intended for use in railway track.
-
Timber - Heavy structural products - Visually graded - Railway track timbers
Provides producers and users of railway track timbers with requirements for the visual grading and selection of species for such timbers intended for use in railway track.
-
Timber - Heavy structural products - Visually graded - Piles
Provides producers and users of piles with requirements for the visual grading and selection of species for timbers intended for use as piling in marine applications (salt or brackish water) or in other than marine applications (land or freshwater).
-
Timber - Heavy structural products - Visually graded - Piles
Provides producers and users of piles with requirements for the visual grading and selection of species for timbers intended for use as piling in marine applications (salt or brackish water) or in other than marine applications (land or freshwater).
-
Timber - Heavy structural products - Visually graded - Piles
Provides producers and users of piles with requirements for the visual grading and selection of species for timbers intended for use as piling in marine applications (salt or brackish water) or in other than marine applications (land or freshwater).
-
Timber - Heavy structural products - Visually graded - Cross-arms for overhead lines
Provides producers and users of timber cross-arms with requirements for the visual grading and selection of species of such timbers intended for use in supporting overhead utility services.
-
Timber - Heavy structural products - Visually graded - Cross-arms for overhead lines
Provides producers and users of timber cross-arms with requirements for the visual grading and selection of species of such timbers intended for use in supporting overhead utility services.
-
Timber - Heavy structural products - Visually graded - Cross-arms for overhead lines
Provides producers and users of timber cross-arms with requirements for the visual grading and selection of species of such timbers intended for use in supporting overhead utility services.
-
Timber - Heavy structural products - Visually graded - Mine lift guides
Provides producers and users of mine lift guides with product requirements including grade descriptions for visual grading of such timbers, intended for use as guides for lift cages in mine shafts.
-
Timber - Heavy structural products - Visually graded - Mine lift guides
Provides producers and users of mine lift guides with product requirements including grade descriptions for visual grading of such timbers, intended for use as guides for lift cages in mine shafts.
-
Timber - Heavy structural products - Visually graded - Mine lift guides
Provides producers and users of mine lift guides with product requirements including grade descriptions for visual grading of such timbers, intended for use as guides for lift cages in mine shafts.
-
Timber - Heavy structural products - Visually graded - Decking for wharves and bridges
Provides producers and users of decking for wharves and bridges with requirements for the visual grading, selection of species and design of such timbers.
-
Timber - Heavy structural products - Visually graded - Decking for wharves and bridges
Provides producers and users of decking for wharves and bridges with requirements for the visual grading, selection of species and design of such timbers.
-
Timber - Heavy structural products - Visually graded - Decking for wharves and bridges
Provides producers and users of decking for wharves and bridges with requirements for the visual grading, selection of species and design of such timbers.
-
Timber - Heavy structural products - Visually graded - Large cross-section sawn hardwood engineering timbers
Provides producers and users of large cross-section sawn hardwood engineering timbers with requirements for the visual grading and selection of species for such timbers intended for use in structures.
-
Timber - Heavy structural products - Visually graded - Large cross-section sawn hardwood engineering timbers
Provides producers and users of large cross-section sawn hardwood engineering timbers with requirements for the visual grading and selection of species for such timbers intended for use in structures.
-
Timber - Heavy structural products - Visually graded - Large cross-section sawn hardwood engineering timbers
Provides producers and users of large cross-section sawn hardwood engineering timbers with requirements for the visual grading and selection of species for such timbers intended for use in structures.
-
Timber - Heavy structural products - Visually graded - Stumps and sole plates
Provides producers and users of stumps and sole plates with requirements for the visual grading and selection of species for such timber products for use in building foundations.
-
Timber - Heavy structural products - Visually graded - Stumps and sole plates
Provides producers and users of stumps and sole plates with requirements for the visual grading and selection of species for such timber products for use in building foundations.
-
Timber - Heavy structural products - Visually graded - Stumps and sole plates
Provides producers and users of stumps and sole plates with requirements for the visual grading and selection of species for such timber products for use in building foundations.
-
Timber - Heavy structural products - Visually graded-Natural round treated hardwood corbels, girders and stringers
Provides producers and users of natural round treated hardwood corbels, girders and stringers with requirements for the visual grading of such timbers intended for use in structures.
-
Timber - Heavy structural products - Visually graded-Natural round treated hardwood corbels, girders and stringers
Provides producers and users of natural round treated hardwood corbels, girders and stringers with requirements for the visual grading of such timbers intended for use in structures.
-
Timber - Heavy structural products - Visually graded-Natural round treated hardwood corbels, girders and stringers
Provides producers and users of natural round treated hardwood corbels, girders and stringers with requirements for the visual grading of such timbers intended for use in structures.
-
Timber - Softwood - Sawn and milled products - Product specification
Sets out the product requirements for sawn and milled softwood timber products including type of product, dimensions, moisture content, tolerances, distortions, surface finish, finger-jointing, glue-laminating and end-matching. Grade descriptions are given in Part 2 of this series.
-
Timber - Softwood - Sawn and milled products - Product specification
Sets out the product requirements for sawn and milled softwood timber products including type of product, dimensions, moisture content, tolerances, distortions, surface finish, finger-jointing, glue-laminating and end-matching. Grade descriptions are given in Part 2 of this series.
-
Timber - Softwood - Sawn and milled products - Product specification
Sets out the product requirements for sawn and milled softwood timber products including type of product, dimensions, moisture content, tolerances, distortions, surface finish, finger-jointing, glue-laminating and end-matching. Grade descriptions are given in Part 2 of this series.
-
Timber - Softwood - Sawn and milled products - Part 1: Product specification
-
Timber - Softwood - Sawn and milled products - Grade description
Sets out the grade descriptions for use with the softwood products specified in Part 1 of this series. The grades are not intended to indicate a ranking of quality. They are primarily used for appearance products. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
-
Timber - Softwood - Sawn and milled products - Grade description
Sets out the grade descriptions for use with the softwood products specified in Part 1 of this series. The grades are not intended to indicate a ranking of quality. They are primarily used for appearance products. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
-
Timber - Softwood - Sawn and milled products - Grade description
Sets out the grade descriptions for use with the softwood products specified in Part 1 of this series. The grades are not intended to indicate a ranking of quality. They are primarily used for appearance products. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
-
Timber - Softwood - Sawn and milled products - Part 2: Grade description
-
Timber - Softwood - Sawn and milled products - Timber for furniture components
Sets out the product requirements and grade descriptions for sawn and milled softwood timber for furniture components. Includes moisture content, tolerances, distortions, surface finish, finger-jointing and glue-laminating. The grades are not intended to indicate a ranking of quality. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
-
Timber - Softwood - Sawn and milled products - Timber for furniture components
Sets out the product requirements and grade descriptions for sawn and milled softwood timber for furniture components. Includes moisture content, tolerances, distortions, surface finish, finger-jointing and glue-laminating. The grades are not intended to indicate a ranking of quality. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
-
Timber - Softwood - Sawn and milled products - Timber for furniture components
Sets out the product requirements and grade descriptions for sawn and milled softwood timber for furniture components. Includes moisture content, tolerances, distortions, surface finish, finger-jointing and glue-laminating. The grades are not intended to indicate a ranking of quality. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
-
Timber - Softwood - Sawn and milled products - Part 3: Timber for furniture components
-
Timber flooring - Sanding and finishing
Proposes methods for the sanding and finishing of timber floors including strip flooring and parquet. Information is included for specifiers, on the problems of assessing equilibrium moisture content and on the types of coating systems available..
-
Timber flooring - Sanding and finishing
Proposes methods for the sanding and finishing of timber floors including strip flooring and parquet. Information is included for specifiers, on the problems of assessing equilibrium moisture content and on the types of coating systems available..
-
Timber flooring - Sanding and finishing
Proposes methods for the sanding and finishing of timber floors including strip flooring and parquet. Information is included for specifiers, on the problems of assessing equilibrium moisture content and on the types of coating systems available..
-
Timber flooring - Part 2: Sanding and finishing
-
Timber - Natural durability ratings
Specifies natural durability ratings for timber species, and provides an authoritative source of information on the natural durability of timber. Includes marine-borer resistance classes.
-
Timber - Natural durability ratings
Specifies natural durability ratings for timber species, and provides an authoritative source of information on the natural durability of timber. Includes marine-borer resistance classes.
-
Timber - Natural durability ratings
Specifies natural durability ratings for timber species, and provides an authoritative source of information on the natural durability of timber. Includes marine-borer resistance classes.
-
Timber - Natural durability ratings
-
Timber - Natural durability ratings
-
Timber - Natural durability ratings
-
Timber - Natural durability ratings
-
Guide to the safe use of preservative-treated timber - Consumer safety information sheet - Copper chromium arsenic(CCA)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer safety information sheet - Copper chromium arsenic(CCA)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer safety information sheet - Copper chromium arsenic(CCA)-treated timber
-
AS 5605 SUPP 1-2007 REC:2017
Guide to the safe use of preservative-treated timber-Consumer safety information sheet-Copper chromium arsenic(CCA)-treated timber
RECONFIRMATION OF AS 5605 SUPP 1-2007 Guide to the safe use of preservative-treated timber-Consumer safety information sheet-Copper chromium arsenic(CCA)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Alkaline copper quaternary(ACQ)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Alkaline copper quaternary(ACQ)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Alkaline copper quaternary(ACQ)-treated timber
-
AS 5605 SUPP 2-2007 REC:2017
Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Alkaline copper quaternary(ACQ)-treated timber
RECONFIRMATION OF AS 5605 SUPP 2-2007 Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Alkaline copper quaternary(ACQ)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Copper azole-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Copper azole-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Copper azole-treated timber
-
AS 5605 SUPP 3-2007 REC:2017
Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Copper azole-treated timber
RECONFIRMATION OF AS 5605 SUPP 3-2007 Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Copper azole-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Light oil/organic solvent-borne preservative (LOSP)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Light oil/organic solvent-borne preservative (LOSP)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Light oil/organic solvent-borne preservative (LOSP)-treated timber
-
AS 5605 SUPP 4-2007 REC:2017
Guide to the safe use of preservative-treated timber—Consumer Safety Information Sheet—Light oil/organic solvent-borne preservative (LOSP)-treated timber
RECONFIRMATION OF AS 5605 SUPP 4-2007 Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Light oil/organic solvent-borne preservative (LOSP)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Creosote or pigment-emulsified creosote (PEC)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Creosote or pigment-emulsified creosote (PEC)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Creosote or pigment-emulsified creosote (PEC)-treated timber
-
AS 5605 SUPP 5-2007 REC:2017
Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Creosote or pigment-emulsified creosote (PEC)-treated timber
RECONFIRMATION OF AS 5605 SUPP 5-2007 Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Creosote or pigment-emulsified creosote (PEC)-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Bifenthrin-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Bifenthrin-treated timber
-
Guide to the safe use of preservative-treated timber - Consumer Safety Information Sheet - Bifenthrin-treated timber
-
AS 5605 SUPP 6-2007 REC:2017
Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Bifenthrin-treated timber
RECONFIRMATION OF AS 5605 SUPP 6-2007 Guide to the safe use of preservative-treated timber-Consumer Safety Information Sheet-Bifenthrin-treated timber
-
Guide to the safe use of preservative-treated timber
Proposes a guide to the public on the safe use of preservative-treated timber. Proposes precautions and recommendations to be taken into account to reduce the potential health and environmental risks associated with using, handling and disposing of timber treated with waterborne, oil-borne and LOSP preservatives, and glueline additives.
-
Guide to the safe use of preservative-treated timber
Proposes a guide to the public on the safe use of preservative-treated timber. Proposes precautions and recommendations to be taken into account to reduce the potential health and environmental risks associated with using, handling and disposing of timber treated with waterborne, oil-borne and LOSP preservatives, and glueline additives.
-
Guide to the safe use of preservative-treated timber
Proposes a guide to the public on the safe use of preservative-treated timber. Proposes precautions and recommendations to be taken into account to reduce the potential health and environmental risks associated with using, handling and disposing of timber treated with waterborne, oil-borne and LOSP preservatives, and glueline additives.
-
Guide to the safe use of preservative-treated timber
-
Guide to the safe use of preservative-treated timber
-
Guide to the safe use of preservative-treated timber
-
Guide to the safe use of preservative-treated timber
RECONFIRMATION OF AS 5605-2007 Guide to the safe use of preservative-treated timber
-
Timber - Methods of test - Moisture content
-
Timber - Methods of test - Moisture content
-
Timber - Methods of test - Moisture content
-
Timber - Methods of test - Moisture content
-
Timber - Methods of test - Moisture content
-
Timber - Methods of test - Moisture content
-
Timber - Methods of test - Moisture content
-
AS/NZS 1080.2:2006 Rec:2016
Timber - Methods of test - Method 2: Slope of grain
-
Timber - Methods of test - Slope of grain
-
Timber - Methods of test - Slope of grain
-
Timber - Methods of test - Slope of grain
-
AS/NZS 1080.3:2000 Rec:2016
Timber - Methods of test - Method 3: Density
-
Timber - Methods of test - Density
Technically equivalent to ISO 3131-1975, it covers density at the moisture content at the time of test (nominal density), oven dry density and conventional density (basic density). A method is given for calculating the nominal density adjusted to 12 percent moisture content.
-
Timber - Methods of test - Density
Technically equivalent to ISO 3131-1975, it covers density at the moisture content at the time of test (nominal density), oven dry density and conventional density (basic density). A method is given for calculating the nominal density adjusted to 12 percent moisture content.
-
Timber - Methods of test - Density
Technically equivalent to ISO 3131-1975, it covers density at the moisture content at the time of test (nominal density), oven dry density and conventional density (basic density). A method is given for calculating the nominal density adjusted to 12 percent moisture content.
-
AS/NZS 1148:2001 Rec:2016
Timber - Nomenclature - Australian, New Zealand and imported species
-
Timber - Nomenclature - Australian, New Zealand and imported species
Sets out a list of botanical names and preferred common names for tree species for use in orders and specifications. Preferred common names have been provided for use in specifying. An alphabetical index is provided, including both botanical names and preferred common names. Other information includes identification of hardwoods and softwoods, normal sources of supply, and, for reference only, other names.
-
Timber - Nomenclature - Australian, New Zealand and imported species
Sets out a list of botanical names and preferred common names for tree species for use in orders and specifications. Preferred common names have been provided for use in specifying. An alphabetical index is provided, including both botanical names and preferred common names. Other information includes identification of hardwoods and softwoods, normal sources of supply, and, for reference only, other names.
-
Timber - Nomenclature - Australian, New Zealand and imported species
Sets out a list of botanical names and preferred common names for tree species for use in orders and specifications. Preferred common names have been provided for use in specifying. An alphabetical index is provided, including both botanical names and preferred common names. Other information includes identification of hardwoods and softwoods, normal sources of supply, and, for reference only, other names.
-
AS/NZS 1604.2:2012 Amd 1:2017
Specification for preservative treatment - Reconstituted wood-based products
-
AS/NZS 1604.2:2012 Amd 1:2017
Specification for preservative treatment - Reconstituted wood-based products
-
AS/NZS 1604.2:2012 Amd 1:2017
Specification for preservative treatment - Reconstituted wood-based products
-
AS/NZS 1604.2:2012 Amd 1:2017
Specification for preservative treatment - Reconstituted wood-based products
-
AS/NZS 1604.2:2012 Amd 1:2017
Specification for preservative treatment - Reconstituted wood-based products
-
Specification for preservative treatment - Reconstituted wood-based products
Specifies requirements for preservative treatment of reconstituted wood-based product for protection against decay or insect attack.
-
Specification for preservative treatment - Reconstituted wood-based products
Specifies requirements for preservative treatment of reconstituted wood-based product for protection against decay or insect attack.
-
Specification for preservative treatment - Reconstituted wood-based products
Specifies requirements for preservative treatment of reconstituted wood-based product for protection against decay or insect attack.
-
Specification for preservative treatment - Reconstituted wood-based products
Specifies requirements for preservative treatment of reconstituted wood-based product for protection against decay or insect attack.
-
Specification for preservative treatment - Reconstituted wood-based products
Specifies requirements for preservative treatment of reconstituted wood-based product for protection against decay or insect attack.
-
Specification for preservative treatment - Reconstituted wood-based products
Specifies requirements for preservative treatment of reconstituted wood-based product for protection against decay or insect attack.
-
Specification for preservative treatment - Reconstituted wood-based products
Specifies requirements for preservative treatment of reconstituted wood-based product for protection against decay or insect attack.
-
AS/NZS 1604.3:2012 Amd 1:2017
Specification for preservative treatment - Plywood
-
AS/NZS 1604.3:2012 Amd 1:2017
Specification for preservative treatment - Plywood
-
AS/NZS 1604.3:2012 Amd 1:2017
Specification for preservative treatment - Plywood
-
AS/NZS 1604.3:2012 Amd 1:2017
Specification for preservative treatment - Plywood
-
AS/NZS 1604.3:2012 Amd 1:2017
Specification for preservative treatment - Plywood
-
Specification for preservative treatment - Plywood
Specifies requirements for preservative treatment of plywood products for protection against decay or insect attack.
-
Specification for preservative treatment - Plywood
Specifies requirements for preservative treatment of plywood products for protection against decay or insect attack.
-
Specification for preservative treatment - Plywood
Specifies requirements for preservative treatment of plywood products for protection against decay or insect attack.
-
Specification for preservative treatment - Plywood
Specifies requirements for preservative treatment of plywood products for protection against decay or insect attack.
-
Specification for preservative treatment - Plywood
Specifies requirements for preservative treatment of plywood products for protection against decay or insect attack.
-
Specification for preservative treatment - Plywood
Specifies requirements for preservative treatment of plywood products for protection against decay or insect attack.
-
Specification for preservative treatment - Plywood
Specifies requirements for preservative treatment of plywood products for protection against decay or insect attack.
-
AS/NZS 1604.4:2012 Amd 1:2017
Specification for preservative treatment - Laminated veneer lumber (LVL)
-
AS/NZS 1604.4:2012 Amd 1:2017
Specification for preservative treatment - Laminated veneer lumber (LVL)
-
AS/NZS 1604.4:2012 Amd 1:2017
Specification for preservative treatment - Laminated veneer lumber (LVL)
-
AS/NZS 1604.4:2012 Amd 1:2017
Specification for preservative treatment - Laminated veneer lumber (LVL)
-
AS/NZS 1604.4:2012 Amd 1:2017
Specification for preservative treatment - Laminated veneer lumber (LVL)
-
Specification for preservative treatment - Laminated veneer lumber (LVL)
Specifies requirements for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack.
-
Specification for preservative treatment - Laminated veneer lumber (LVL)
Specifies requirements for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack.
-
Specification for preservative treatment - Laminated veneer lumber (LVL)
Specifies requirements for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack.
-
Specification for preservative treatment - Laminated veneer lumber (LVL)
Specifies requirements for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack.
-
Specification for preservative treatment - Laminated veneer lumber (LVL)
Specifies requirements for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack.
-
Specification for preservative treatment - Laminated veneer lumber (LVL)
Specifies requirements for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack.
-
Specification for preservative treatment - Laminated veneer lumber (LVL)
Specifies requirements for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack.
-
Specification for preservative treatment - Laminated veneer lumber (LVL)
Specifies requirements for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack.
-
AS/NZS 1604.5:2012 Amd 1:2017
Specification for preservative treatment - Glued laminated timber products
-
AS/NZS 1604.5:2012 Amd 1:2017
Specification for preservative treatment - Glued laminated timber products
-
AS/NZS 1604.5:2012 Amd 1:2017
Specification for preservative treatment - Glued laminated timber products
-
AS/NZS 1604.5:2012 Amd 1:2017
Specification for preservative treatment - Glued laminated timber products
-
AS/NZS 1604.5:2012 Amd 1:2017
Specification for preservative treatment - Glued laminated timber products
-
Specification for preservative treatment - Glued laminated timber products
Specifies requirements for preservative treatment of glued laminated timber products for protection against decay or insect attack.
-
Specification for preservative treatment - Glued laminated timber products
Specifies requirements for preservative treatment of glued laminated timber products for protection against decay or insect attack.
-
Specification for preservative treatment - Glued laminated timber products
Specifies requirements for preservative treatment of glued laminated timber products for protection against decay or insect attack.
-
Specification for preservative treatment - Glued laminated timber products
Specifies requirements for preservative treatment of glued laminated timber products for protection against decay or insect attack.
-
Specification for preservative treatment - Glued laminated timber products
Specifies requirements for preservative treatment of glued laminated timber products for protection against decay or insect attack.
-
Specification for preservative treatment - Glued laminated timber products
Specifies requirements for preservative treatment of glued laminated timber products for protection against decay or insect attack.
-
Specification for preservative treatment - Glued laminated timber products
Specifies requirements for preservative treatment of glued laminated timber products for protection against decay or insect attack.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 1: General requirements, sampling, and determination of sapwood and heartwood presence
Specifies general requirements for sampling and analysing timber preservatives and preservative-treated timber, and sets out the method for determining the presence of sapwood and heartwood.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 1: General requirements, sampling, and determination of sapwood and heartwood presence
Specifies general requirements for sampling and analysing timber preservatives and preservative-treated timber, and sets out the method for determining the presence of sapwood and heartwood.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 1: General requirements, sampling, and determination of sapwood and heartwood presence
Specifies general requirements for sampling and analysing timber preservatives and preservative-treated timber, and sets out the method for determining the presence of sapwood and heartwood.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 2: Determination of preservative penetration by spot tests
Sets out the method for determining the penetration of preservative into preservative-treated wood products. It deals with the preparation of material for testing and the methods for determining the penetration of creosote, boron, copper in copper-based preservatives, pentachlorophenol, tin, zinc and fluorine.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 2: Determination of preservative penetration by spot tests
Sets out the method for determining the penetration of preservative into preservative-treated wood products. It deals with the preparation of material for testing and the methods for determining the penetration of creosote, boron, copper in copper-based preservatives, pentachlorophenol, tin, zinc and fluorine.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 2: Determination of preservative penetration by spot tests
Sets out the method for determining the penetration of preservative into preservative-treated wood products. It deals with the preparation of material for testing and the methods for determining the penetration of creosote, boron, copper in copper-based preservatives, pentachlorophenol, tin, zinc and fluorine.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 3: Analysis methods for determination of preservative retention
Specifies analysis methods for determining preservative retention in preservative-treated wood products.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 3: Analysis methods for determination of preservative retention
Specifies analysis methods for determining preservative retention in preservative-treated wood products.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 3: Analysis methods for determination of preservative retention
Specifies analysis methods for determining preservative retention in preservative-treated wood products.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 4: ​Analysis methods for determination of preservative solution concentration
Specifies analysis methods for the determination of preservative solution concentration. Analytical procedures for the determination of specific preservative components are given for oil-borne and waterborne preservatives.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 4: ​Analysis methods for determination of preservative solution concentration
Specifies analysis methods for the determination of preservative solution concentration. Analytical procedures for the determination of specific preservative components are given for oil-borne and waterborne preservatives.
-
Methods for sampling and analysing timber preservatives and preservative-treated timber, Part 4: ​Analysis methods for determination of preservative solution concentration
Specifies analysis methods for the determination of preservative solution concentration. Analytical procedures for the determination of specific preservative components are given for oil-borne and waterborne preservatives.
-
Timber - Solid - Stress-graded for structural purposes - General requirements
Specifies requirements for structural timber produced using a qualified grading method, and sets out general requirements for stress-graded solid timber intended for use in accordance with the AS 1720 series, AS 1684 series, NZS 3603 and NZS 3604.
-
Timber - Solid - Stress-graded for structural purposes - General requirements
Specifies requirements for structural timber produced using a qualified grading method, and sets out general requirements for stress-graded solid timber intended for use in accordance with the AS 1720 series, AS 1684 series, NZS 3603 and NZS 3604.
-
Timber - Solid - Stress-graded for structural purposes - General requirements
Specifies requirements for structural timber produced using a qualified grading method, and sets out general requirements for stress-graded solid timber intended for use in accordance with the AS 1720 series, AS 1684 series, NZS 3603 and NZS 3604.
-
Timber - Solid - Stress-graded for structural purposes - General requirements
Specifies requirements for structural timber produced using a qualified grading method, and sets out general requirements for stress-graded solid timber intended for use in accordance with the AS 1720 series, AS 1684 series, NZS 3603 and NZS 3604.
-
Timber - Solid - Stress-graded for structural purposes - General requirements
Specifies requirements for structural timber produced using a qualified grading method, and sets out general requirements for stress-graded solid timber intended for use in accordance with the AS 1720 series, AS 1684 series, NZS 3603 and NZS 3604.
-
AS/NZS 1748.1-2011 AMDT 1
Timber - Solid - Stress-graded for structural purposes
-
AS/NZS 1748.1-2011 AMDT 1
Timber - Solid - Stress-graded for structural purposes
-
AS/NZS 1748.1-2011 AMDT 1
Timber - Solid - Stress-graded for structural purposes
-
Timber - Solid - Stress-graded for structural purposes - Qualification of grading method
Specifies requirements for the qualification of a grading method to be used in manufacturing stress-graded solid timber that complies with AS/NZS 1748.1.
-
Timber - Solid - Stress-graded for structural purposes - Qualification of grading method
Specifies requirements for the qualification of a grading method to be used in manufacturing stress-graded solid timber that complies with AS/NZS 1748.1.
-
Timber - Solid - Stress-graded for structural purposes - Qualification of grading method
Specifies requirements for the qualification of a grading method to be used in manufacturing stress-graded solid timber that complies with AS/NZS 1748.1.
-
Timber - Solid - Stress-graded for structural purposes - Qualification of grading method
Specifies requirements for the qualification of a grading method to be used in manufacturing stress-graded solid timber that complies with AS/NZS 1748.1.
-
Timber - Solid - Stress-graded for structural purposes - Qualification of grading method
Specifies requirements for the qualification of a grading method to be used in manufacturing stress-graded solid timber that complies with AS/NZS 1748.1.
-
AS/NZS 1748.2-2011 AMDT 1
Timber - Solid - Stress-graded for structural purposes
-
AS/NZS 1748.2-2011 AMDT 1
Timber - Solid - Stress-graded for structural purposes
-
AS/NZS 1748.2-2011 AMDT 1
Timber - Solid - Stress-graded for structural purposes
-
AS/NZS 2843.1:2006 Rec:2016
Timber preservation plants - Part 1: Timber preservation plant site design
-
Timber preservation plants - Timber preservation plant site design
Specifies requirements for the siting, design and layout of timber preservation plant sites. Deals in general terms with these aspects in a manner intended to prevent and mitigate the health risk of plant personnel and minimize environmental contamination from timber preservation plant sites. Applicable to all approved preservatives and, where necessary, specific requirements for some preservative are given.
-
Timber preservation plants - Timber preservation plant site design
Specifies requirements for the siting, design and layout of timber preservation plant sites. Deals in general terms with these aspects in a manner intended to prevent and mitigate the health risk of plant personnel and minimize environmental contamination from timber preservation plant sites. Applicable to all approved preservatives and, where necessary, specific requirements for some preservative are given.
-
Timber preservation plants - Timber preservation plant site design
Specifies requirements for the siting, design and layout of timber preservation plant sites. Deals in general terms with these aspects in a manner intended to prevent and mitigate the health risk of plant personnel and minimize environmental contamination from timber preservation plant sites. Applicable to all approved preservatives and, where necessary, specific requirements for some preservative are given.
-
AS/NZS 2843.1-2006 AMDT 1
Timber preservation plants - Timber preservation plant site design
-
AS/NZS 2843.1-2006 AMDT 1
Timber preservation plants - Timber preservation plant site design
-
AS/NZS 2843.1-2006 AMDT 1
Timber preservation plants - Timber preservation plant site design
-
AS/NZS 2843.1-2006 AMDT 2
Timber preservation plants - Timber preservation plant site design
-
AS/NZS 2843.1-2006 AMDT 2
Timber preservation plants - Timber preservation plant site design
-
AS/NZS 2843.1-2006 AMDT 2
Timber preservation plants - Timber preservation plant site design
-
AS/NZS 2843.2:2006 Rec:2016
Timber preservation plants - Part 2: Treatment area operation
-
Timber preservation plants - Treatment area operation
Specifies requirements for the operation of timber preservation equipment used in the treatment area. Deals in general terms with these aspects in a manner intended to prevent and mitigate the health risk to treatment area personnel and minimize environmental contamination from timber preservation plant sites.
-
Timber preservation plants - Treatment area operation
Specifies requirements for the operation of timber preservation equipment used in the treatment area. Deals in general terms with these aspects in a manner intended to prevent and mitigate the health risk to treatment area personnel and minimize environmental contamination from timber preservation plant sites.
-
Timber preservation plants - Treatment area operation
Specifies requirements for the operation of timber preservation equipment used in the treatment area. Deals in general terms with these aspects in a manner intended to prevent and mitigate the health risk to treatment area personnel and minimize environmental contamination from timber preservation plant sites.
-
Timber - Classification into strength groups
Specifies a procedure for the classification of timber species into positive or provisional strength groups based on testing of small, clear specimens or on the species mean dry density. When used in conjunction with visual grading rules the strength groups provide a means of determining a stress grade for graded timber. A list of species and their strength groups is given.
-
Timber - Classification into strength groups
Specifies a procedure for the classification of timber species into positive or provisional strength groups based on testing of small, clear specimens or on the species mean dry density. When used in conjunction with visual grading rules the strength groups provide a means of determining a stress grade for graded timber. A list of species and their strength groups is given.
-
Timber - Classification into strength groups
Specifies a procedure for the classification of timber species into positive or provisional strength groups based on testing of small, clear specimens or on the species mean dry density. When used in conjunction with visual grading rules the strength groups provide a means of determining a stress grade for graded timber. A list of species and their strength groups is given.
-
Timber - Classification into strength groups
Specifies a procedure for the classification of timber species into positive or provisional strength groups based on testing of small, clear specimens or on the species mean dry density. When used in conjunction with visual grading rules the strength groups provide a means of determining a stress grade for graded timber. A list of species and their strength groups is given.
-
Timber - Classification into strength groups
Specifies a procedure for the classification of timber species into positive or provisional strength groups based on testing of small, clear specimens or on the species mean dry density. When used in conjunction with visual grading rules the strength groups provide a means of determining a stress grade for graded timber. A list of species and their strength groups is given.
-
AS/NZS 2878-2000 REC:2017
Timber - Classification into strength groups
RECONFIRMATION OF AS/NZS 2878-2000 Timber - Classification into strength groups
-
Timber - Solid - Stress-graded for structural purposes - Verification of properties
Specifies the general principles for verification of the properties of sawn structural timber produced using any method of grading and presents a range of specific methods that can be selected by manufacturers of structural sawn timber.
-
Timber - Solid - Stress-graded for structural purposes - Verification of properties
Specifies the general principles for verification of the properties of sawn structural timber produced using any method of grading and presents a range of specific methods that can be selected by manufacturers of structural sawn timber.
-
Timber - Solid - Stress-graded for structural purposes - Verification of properties
Specifies the general principles for verification of the properties of sawn structural timber produced using any method of grading and presents a range of specific methods that can be selected by manufacturers of structural sawn timber.
-
Timber - Solid - Stress-graded for structural purposes - Verification of properties
-
Timber - Solid - Stress-graded for structural purposes - Verification of properties
-
Timber - Solid - Stress-graded for structural purposes - Verification of properties
-
AS/NZS 4491:1997 Rec:2016
Timber - Glossary of terms in timber related-Standards
-
Timber - Glossary of terms in timber related Standards
Includes definitions of terms used in timber related Australian and New Zealand Standards. Includes new products and reflects changes in a number of Standards being published at present.
-
Timber - Glossary of terms in timber related Standards
Includes definitions of terms used in timber related Australian and New Zealand Standards. Includes new products and reflects changes in a number of Standards being published at present.
-
Timber - Glossary of terms in timber related Standards
Includes definitions of terms used in timber related Australian and New Zealand Standards. Includes new products and reflects changes in a number of Standards being published at present.
-
Timber - Glossary of terms in timber related Standards
Includes definitions of terms used in timber related Australian and New Zealand Standards. Includes new products and reflects changes in a number of Standards being published at present.
-
AS/NZS 4787:2001 Rec:2016
Timber - Assessment of drying quality
-
Timber - Assessment of drying quality
Sets out procedures for specifying and verifying the moisture content of seasoned solid timber. Provides a range of drying quality classes for timber dried in kilns or by other means where the result is a population of timber with a predictable scater of moisture contents. Other drying quality criteria such as checking, collapse and distortion are detailed in an appendix.
-
Timber - Assessment of drying quality
Sets out procedures for specifying and verifying the moisture content of seasoned solid timber. Provides a range of drying quality classes for timber dried in kilns or by other means where the result is a population of timber with a predictable scater of moisture contents. Other drying quality criteria such as checking, collapse and distortion are detailed in an appendix.
-
Timber - Assessment of drying quality
Sets out procedures for specifying and verifying the moisture content of seasoned solid timber. Provides a range of drying quality classes for timber dried in kilns or by other means where the result is a population of timber with a predictable scater of moisture contents. Other drying quality criteria such as checking, collapse and distortion are detailed in an appendix.
-
The Sub Committees within the Technical Committee are listed here.
-
TM-012-01 Dummy
-
TM-012-01-03 AS/NZS 1604.3 Working Group